A garage is a very important part of a house. In El Cajon, 40% of the people don’t focus on their garage maintenance. The garage houses all your necessary tools and automobiles, and therefore it requires the same amount of attention that any other room does. This is important if your garage is attached or has access to your home. If the garage is not maintained properly and a burglar luckily finds a way into it, entering your house will not be an issue.

The one common problem that many people face is a damaged or broken garage door tracks in El Cajon CA. Apart from putting you through the difficulty of making the garage door function, it also makes you prone to injury. So, it is important to know how to fix or replace the damaged garage door tracks. Some steps can help you understand it better.

Buying the Right Garage Door Replacement Track

Buying a garage door replacement track is the first step in fixing or replacing the garage door. You may contact the garage door manufacturer or garage door track services in El Cajon CA to buy the right track.

Removing Old Rollers and Hinge Pins

When fixing or replacing a garage door track, it is vital to remove the hinge pins and the rollers that are attached to the door. When replacing the old parts of the garage doors, pulling hinge pins out of the rollers may work for some while simple unscrewing may work for the others.

Removal of springs to Move the Door Out

The removal of the springs is the next step in this process. After getting done with this, remove the door. To do this, push the garage door carefully without damaging the hinges and roller pins on the other track.

Marking the Location of the Tracks

Before removing the damaged track, use a marking pen to mark the area above and below the track. This will make the aligning of new track easier for you.

Removal of the Old Track

Once you are done with marking the location, remove the old tracks. In order to do this, unscrew the screws that are securing the track to the wall. Start unscrewing from the bottom and work your way up. The advantage of doing the bottom first is that you will keep the track from falling while you are doing the work.

Affixing the New Track

Align the track with the marks that you marked earlier. The way you removed the old track is exactly how you will affix the new one.

Positioning Back the Door

Using a little help from professionals who deal with residential garage doors in El Cajon CA, re-position the door in a way that allows you to reinstall the hinges and rollers on the door and track.

Reinstallation of Rollers and Hinge Pins

The last step is to reinstall the hinge pins and rollers by screwing them into the door. Make sure that the screw are tight and the new track is fitted appropriately.

This is how you can deal with this process yourself. However, hiring a professional is a better way to get the work done if you have no expertise in this area and are doubtful about performing it.